18GA 9030 9032 9035 9038 Iitapile zeGalvanized zeFanitshala yeeKhabhinethi

Inkcazelo emfutshane:


Iinkcukacha zeMveliso

Iithegi zeMveliso

Product Iinkcukacha eziphambili / imisebenzi ekhethekileyo

Uhlobo: 90 Meidum wire staples
Ububanzi: 1.25mm±0.02mm
Ukutyeba: 1mm±0.02mm
Ubukhulu: 18Ga
Isithsaba:5.7mm
Umzekelo: 9013 9015 9016 9018 9019 9022 9025 9028 9032 9035 9038 9040
Material: Ucingo lwegalvanized
Umbala: Isilivere, ubhedu, igolide, iMnyama
Isicelo:Isidibanisi,Ihosing yePrefab, amacandelo oKwakha,Ifanitshala
Ukupakishwa: Ibhokisi + ibhokisi, OEM
Ixesha lokuhanjiswa: Kwiintsuku ezingama-30 zokuvelisa

18GA 9030 9032 9035 9038 IiStaples eziGqwethiweyo zeFanitshala yeeKhabhinethi (1)

Iimbonakalo

I-1.Esebenzayo ngakumbi kwaye isetyenziswe ngokubanzi kwiindawo ezahlukeneyo.

I-2.Ubude bemveliso bune-4-13mm kunye nezinye iinkcukacha ezininzi zohlobo, oluyiyo
esebenzayo ekubetheleni amaplanga anobunzima obahlukeneyo.

3.Sikhetha izixhobo ezikumgangatho ophezulu zokuvelisa, kwaye siqinisekise ukuba umaleko we-zinc ufikelela kwi-40g/㎡
ukuze kuthintelwe i-staple ekuvuseni kunye nokuhlwa.

4.Lawula ngokungqongqo umgangatho wemveliso kunye nenkqubo yokulawula umgangatho we-RoHs.

FAQ

1.Q: Ngaba unayo imveliso yakho yokuvelisa?
A: Ewe, asinawo umzi-mveliso wethu kuphela, sikwanobudlelwane bentsebenziswano kunye neefektri ezingaphezu kwekhulu eTshayina.

2.Q: Ngaba ungasithumela iisampuli?
A: Siyavuya ukukuthumela isampuli ukuvavanya umgangatho kunye nemarike.

3.Q: Malunga neemveliso zakho, ngaba ungayenza i-OEM?
A: Ewe, inkonzo ye-OEM iyafumaneka.

I-4.Q: Ngaba ubonelela kwakhona ngeengxenye zezixhobo ze-pneumatic?
A: Nje ukuba siqinisekise iimodeli ongathanda ukuziodola, siya kukuthumelela umzobo ukuze ujongwe kwaye sikucebise iindawo ezaphuka lula.

5.Q: Kwimveliso, ngaba unokutshiza omnye umbala womzobo?
A: Ewe, umbala unokwenziwa ngokwezifiso.

I-6.Q: Liliphi ixesha lokuhambisa?
A: Ngokuqhelekileyo kuthatha malunga neentsuku ze-20-30 zokusebenza ukuvelisa umyalelo omnye.

I-7.Q: Injani imigaqo yokuhlawula?
A: Ngokuqhelekileyo i-T / T 30% kwangaphambili kunye ne-T / T 70% ngaphambi kokuthunyelwa.

I-8.Q: Ngaba ndingaxuba iimodeli ezahlukeneyo kwisitya esinye?
A: Ewe, iimodeli ezahlukeneyo zinokuxutywa kwisitya esinye, kodwa ubungakanani bemodeli nganye akufanele bube ngaphantsi kwe-MOQ.

I-9.Q: Yenza njani i-factory yakho malunga nokulawula umgangatho?
A: Sihlala sinikela ingqalelo enkulu kulawulo lomgangatho kwasekuqaleni kwaye yonke imveliso yavavanywa isiqwenga ngesiqwenga ngaphambi kokuhanjiswa.

I-10.Q: Ngaba unayo isatifikethi somgangatho?
A: Ewe, sinayo iCE, SGS,ISO, ect.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi